A capable home improvement specialist can work on your hardwood Manhattan flooring job to execute your wishes and requirements. With the increase of advanced manufacturing process, you are assured of topnotch quality work from home improvement professionals. In addition to revamping your home with new flooring, also try Manhattan painting.
However, it is just as imperative that you take into consideration these important points and critical requisites in order to achieve a perfect floor.
Point #1: Check the Condition of the Windows
Before you start your hardwood flooring project, it is essential for you to inspect the windows. check for leaks in the windows. Carefully inspect the plaster and the drywall right below the windows. You don’t want to end up working on the drywall and the plaster right above newly constructed Manhattan flooring. If there are problems in the walls and the windows make sure that these problems are resolved before any work on the flooring is started by your installer.
Point #2: Properly Schedule the Painting Job
If the home improvement project involves some Manhattan painting job, make make certain it is finished prior of the installation of the hardwood flooring materials. You have to finish all the painting ahead of any flooring projects as you don’t want to have paint splatters and ladder marks occur on brand new hardwood flooring.
Point #3: Work on the Baseboards
If there still a baseboard or a quarter-round, make sure that these are removed before commencing on the installation of the hardwood flooring. Finishing nails should be removed as well that may have protruded through the baseboards.
Point #4: Work on the Trim of the Door Frame
The best way to approach the work on the door frame trim when doing a hardwood Manhattan flooring job is the cut the trim to fit the installation of the flooring boards below it. This allows a sleeker finish in the floor installation particularly underneath the trim of the door frame.
Point #5: Remove the Doors before Starting Work
It would be more simple working on the trim of the door frame and the installation of the hardwood flooring if the doors are removed before the work is started. You also do the necessary trimming of the door to adjust to the change in thickness of the floor.
Point #6: Inspect for Squeaks and loose Joints
Before the installation of the hardwood flooring material, conduct a complete inspection for any loose attachments in the sub-floors and plywood that could produce squeaks. fix this by using screws tosecure anyloose attachments and installations.
Point #7: Check for Soft Spots
Check for any soft spots on the sub-floor. Fix any issues on sagging on the floor by adding the necessary support in the floor joist.
Point #8: Check for Protruding Nails and Screws
Fix any screws and nails that are not level to the floor. In cases where chipboard is used as sub-floors, bubbles may occur surrounding the area of the screw. To correct this you would work through wood rasp, sander or block pane.