If removing wood paneling is not an option… what are we to do?
I had Tawn Gale… one of THAT Painter Lady Experts answer this question:
Hi there, I have a question about painting or white washing real wood paneling.
We have a VINTAGE 1975 house that we have recently purchased. I love the BONES of the house, but it is in need of some serious updating.
The den has real wood knotty pine paneling in a walnut type color finish. It is BEAUTIFUL but way to dark.
How can I update it a bit and lighten it up too. Without completly stripping it and refinishing it….NOT AN OPTION!
Most paneling has a glossy surface (varnish?) and before you can paint or whitewash to lighten it you’ll have to “de-gloss” it.
Years ago I painted some ugly paneling and skipped this step. Huge mistake! The paint peeled away in huge strips. Not good.
I have since learned that all I needed to do was give it a light scuff-sanding (steel wool works) or there are de-glossing chemicals available at professional paint stores that you can use as well.
Once “de-glossed’ you’ll need to apply a good primer/sealer if you are going to paint. Behr has a good one at Home Depot, but Kilz is another good one (a little pricey though) and can be found most anywhere (even Wal-Mart). After you’ve primed it you are ready to paint it your favorite color.
If you’d rather just “whitewash” the paneling you can skip the “primer” part and simply take a thinned down coat of white/off white paint (or a color can be used, too) and using a sponge (a regular sponge will work but one that fits in your hand nicely/comfortably) “wash” the walls.
To avoid “streaks” you will need to either wash in one direction (down the wall with the grain of the wood paneling) or you’ll need to soften your wash streaks with a woolie as you go and before your “wash” dries.
Too, if your wood is “raw” it will absorb the paint unevely like rubbing chalk with water.
You may want to put a sealant on it like MinWax Ploycrylic first, then “ruff it up” before whitewashing.
Work in small sections of the panel and in a continuous flow (one long wipe down the wall rather than across two or three sections).
When you are finished seal your work with MinWax Polycrylic in and finish you like (Matte, Semi-Gloss, etc).
This will protect your pretty new walls and allows you to wipe them clean with a damp cloth if necessary.
I hope this was helpful in learning how to paint paneling… If you need more help, don’t hesitate to ask.
THAT Painter Lady – Tawn